How does a RDWC system work?

RDWC systems have a series of containers with grow sites that hold netted pots, growing medium, and plants. … Air also circulates through the system along with the water and nutrients in the same manner. Each plant in the system soaks up the necessary amount of water, air, and nutrients needed to grow and thrive.

How does a RDWC hydroponic system work?

The RDWC hydroponic system works using the quietest JET-STREAM™ A.I.R™ pumps to increase oxygen delivery to the plant's roots submerged in the nutrient-rich water. The JET-STREAM™ A.I.R™ pumps have been designed with Deep Water Culture in mind and boast a high pressure to deliver oxygenated water to the root zone.

How does a recirculating DWC system work?

Much like it's cousin, the bubble bucket, the recirculating deep water culture system (RDWC, better known as DWC) quickly grows plants in a near ideal environment. Air stones in each plant site, and the reservoirs. … A pump to recirculate the nutrient solution throughout the system.

How do you grow in RDWC?

Technique

  1. Rinse grow rocks/stones thoroughly before use. …
  2. Fill the net pot to a 2” depth with rocks/ stones.
  3. Rest bare root cutting on rocks/stones and gently fill remaining space up to 1” from the top lip of the net pot.
  4. Adjust system water level to the top of root crown.

What size water pump do I need for RDWC?

This depends on how many times you want the water to circulate water throughout the entire RDWC system per hour. I imagine once per hour would be appropriate, so a 20 GPH for the 4 bucket system, 40 GPH for the 8 bucket and 60 GPH for the 12 bucket system.

What is the most efficient hydroponic system?

Without a doubt the most cost effective hydroponic setup for commercial growers is the Botanicare Slide Bench System. It will allow you to get the highest quantity of plants possible in your expensive commercial grow room, getting you the highest ROI possible.

How do you recirculate a DWC?

How To Build A Recirculating DWC System

  1. Set Up Your Reservoir. Designate one of your containers to be your reservoir where the nutrient-rich water will be stationed. …
  2. Prepare Each Container. …
  3. Set Up Your Plants. …
  4. Balance The pH. …
  5. Clogged Pipes. …
  6. Waterborne Diseases. …
  7. Limited Variety Of Plants. …
  8. Electric Outages.

How often do you change the water in a DWC system?

Therefore, every 1-2 weeks (generally the longest you should wait before changing your nutrient solution is three weeks), you should remove your plants from the reservoir to replace and refresh the hydroponic nutrient solution, then place the plants back in the reservoir.

How many GPH does RDWC have?

Many experienced hydroponic gardeners recommend running between 800 and 1200 GPH through RDWC systems. That said, for each individual container in an RDWC system, a minimum of approximately 80 GPH of water is required for healthy and thriving plants.